ProX Live Performance Gear ProX Dual Turntable 12-Inch Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This prox live performance gear prox xs tmc1012wltfstnd dj coffin review examines a protective case designed for mobile DJs. It is a rigid flight case built to transport two 1200-style turntables and a 12-inch mixer. The listing specifies dimensions of 56 inches in length, 20 inches in height, and 8 inches in width. It weighs 51 pounds. The construction uses 3/8-inch Gig-Ready Series plywood with steel ball corners. This review focuses on these physical attributes to help you decide if this container meets your gear protection needs during travel.
What stands out
- 3/8-inch Gig-Ready Series plywood construction reinforced with steel ball corners
- Dimensions of 56 x 20 x 8 inches accommodate two turntables and a mixer
- Large sliding laptop shelf holds up to two laptops
- Removable front panel allows quick access to front input jacks
- Adjustable foam inserts secure equipment and minimize movement during transit
Who it fits
Good fit for
This case suits DJs who transport two direct-drive turntables and a mixer regularly. The 56-inch length and 8-inch width provide a snug fit for standard 1200-style decks and 12-inch mixers. You will appreciate the sliding laptop shelf if you use two laptops for your sets. The removable front panel is useful for quick connections without opening the main compartment. If you prioritize rugged plywood construction and steel corner protection, this coffin case aligns with your setup.
Who should skip it
You should look at another option if you need a lighter case. This unit weighs 51 pounds, which may be heavy for solo transport. The 20-inch height and 56-inch length make it bulky for smaller vehicles or tight storage spaces. If you only use one turntable, the dual-deck layout wastes space. The fixed foam inserts require adjustment for different gear sizes. You might prefer a smaller, lighter case if portability is your main concern over maximum protection.
Verdict: This coffin case offers robust protection for a dual-turntable and mixer setup. Its plywood build and sliding shelf make it a practical choice for serious mobile DJs.
Key specs explained for ProX case
Dimensions: 56 x 20 x 8 inches
This coffin-style case measures 56 inches long, 20 inches high, and 8 inches deep. The elongated shape accommodates two turntables and a mixer in a single row. You need this length to fit standard 12-inch units side by side. Compare this footprint with square cases that stack gear vertically. The 8-inch depth is tight, so ensure your equipment fits without excessive clearance.
Weight: 51 pounds
The empty case weighs 51 pounds. This mass comes from the 3/8-inch plywood construction and steel reinforcement. You must account for this base weight when calculating total load for transport. Heavier cases offer more rigidity against impact but require more effort to move. Check if your vehicle suspension can handle the combined weight of the case and your gear.
Material: 3/8-inch Gig-Ready Series Plywood
The shell is built from 3/8-inch thick plywood. This thickness provides structural integrity against crushing forces during stacking. You benefit from a rigid barrier that resists bending better than thinner plastic or thin wood. Compare this to standard 1/2-inch cases which offer even more protection but add significant weight. This spec indicates a balance between durability and portability for mobile setups.
Capacity: 2 Turntables and 12-inch Mixer
The interior is configured to hold two 1200-style turntables and one 12-inch mixer. You get dedicated space for each unit, minimizing movement during transit. This specific layout suits DJs who use this exact combination of hardware. Compare this to universal cases that require custom foam cutting. If you use different sized mixers, verify the internal width matches your specific model before purchasing.
Design and Build Specs
The listing describes the ProX XS-TMC1012WLTFSTND as a rugged flight case. It is constructed from 3/8-inch Gig-Ready Series Plywood. This material choice suggests a balance between structural strength and manageable weight. The corners are reinforced with steel ball corners. These metal caps protect the wood edges from impact damage during loading and unloading. The exterior features a signature Honeycomb Digital pattern. This finish is applied to a black base with red accents, according to the listing.
The case weighs 51 pounds. This mass provides stability but requires significant effort to move. It measures 56 inches in length, 20 inches in height, and 8 inches in depth. The elongated layout is designed to hold two 1200-style turntables and a 12-inch mixer in a single row. Padded steel handles are integrated into the design. These handles allow for secure gripping when lifting the unit. Recessed latches keep the case sealed during transit.
Internal organization relies on adjustable foam inserts. You can configure these inserts to fit your specific equipment dimensions. This minimizes movement inside the case. A large sliding laptop shelf is included. This shelf accommodates up to two laptops above the main deck area. A removable front panel offers quick access to front input jacks without opening the entire case. CNC technology is used in its construction for precision, according to the listing.
Setup and Daily Use Guide
Setting up this ProX case involves placing your gear inside the adjustable foam inserts. The listing notes that these inserts ensure a snug fit for your equipment. This minimizes movement during transport, which helps protect your turntables and mixer. You will need to arrange two 1200-style turntables and a 12-inch mixer within the 56-inch length. The case accommodates these items in a single row, so you must align them carefully before securing the lid. The padded steel handles and recessed latches provide a secure closure. You can lift the case using the handles, which are designed for ease of handling. The weight of 51 pounds is a factor when moving the case alone. For daily use, the removable front panel allows quick access to front input jacks. This feature is useful when you need to connect cables without opening the entire case. The large sliding laptop shelf accommodates up to two laptops. This provides a dedicated space for your controllers or laptops above the main gear. Ample storage space inside allows for tidy cable organization and storage of small accessories. This helps keep your setup organized during performances. The CNC technology used in crafting the case suggests precision in the fit of these components. The Honeycomb Digital pattern is a visual detail that does not affect function. You should ensure all equipment fits securely within the foam before transporting. The rigid construction supports the weight of your gear during travel. This case is designed for mobile DJs who need reliable protection. The sliding shelf adds convenience for managing your digital tools alongside your analog gear.
Before You Buy This Case
You need to verify that your turntables match the 1200-style footprint. The listing specifies accommodation for two 1200-style units and a 12-inch mixer. If your gear differs, the foam inserts may not fit securely. Check your mixer width against the central section. You should also inspect the foam inserts for wear before loading. Replace any damaged sections to prevent movement during transit. The case weighs 51 pounds. You will need a cart or assistance for loading. Store the case in a dry area. Moisture can damage the plywood core. Clean the exterior with a dry cloth. Avoid harsh chemicals. This case fits well in mobile DJ setups. It keeps gear organized and protected. It is a practical choice for transport. Consider it alongside other flight cases for your mobile rig. Ensure it meets your venue’s size restrictions. Verify the latches function smoothly before each gig.
Check before you buy
- Confirm turntables match the 1200-style footprint.
- Check mixer width fits the central section.
- Inspect foam inserts for existing damage.
- Verify venue size restrictions for transport.
- Test latch function before loading gear.
The product at a glance
ProX Dual Turntable and 12-Inch Mixer Flight Case
Best for: Dual turntable setups with laptop storage
- Woofer Size
- 12-Inch
- Included Accessories
- Case, Flight Case
- Dimensions
- 8 × 56 × 20 inches
- Weight
- 51 pounds
View on Amazon: ProX Dual Turntable and 12-Inch Mixer Flight Case Affiliate link
This ProX flight case protects two 1200-style turntables and a 10- to 12-inch mixer. It measures 56 by 20 by 8 inches and weighs 51 pounds. The build uses 3/8-inch Gig-Ready Series Plywood with steel ball corners. A large sliding laptop shelf holds two laptops. Adjustable foam inserts keep gear secure during transport.
Pros
- 3/8-inch Gig-Ready Series Plywood construction
- Steel ball corner reinforcement
- Sliding shelf for two laptops
- Removable front panel for jack access
Cons
- 51-pound weight adds transport bulk
- 56-inch length requires significant storage space
- No mention of built-in locking mechanisms
Good fit if
- You need rugged protection for two turntables
- You want a dedicated laptop shelf
- You prioritize heavy-duty plywood construction
Skip if
- You need a lightweight carry option
- You have limited storage space
- You only carry one turntable
Verdict: ProX XS-TMC1012WLTFSTND DJ Coffin suits DJs who need heavy-duty protection for dual turntables and a mixer. Its 56-inch length and 51-pound weight make it ideal for professional touring rather than casual transport.
Specifications side by side
| Spec | ProX Dual Turntable and 12-Inch Mixer Flight Case |
|---|---|
| Woofer Size | 12-Inch |
| Included Accessories | Case, Flight Case |
| Dimensions | 8 × 56 × 20 inches |
| Weight | 51 pounds |
| Size | One Size |
| Color | Black on Red |
| Model | XS-TMC1012WLTFSTND |
Frequently asked questions
Does the ProX XS-TMC1012WLTFSTND fit two turntables and a mixer?
Yes, this case is designed for that specific setup. The 56-inch length accommodates two 1200-style turntables and a 12-inch mixer in a single row. You get adjustable foam inserts to secure each piece of gear. This configuration keeps all your essential DJ equipment in one protected container.
How heavy is the ProX dual turntable flight case?
The case weighs 51 pounds. This substantial weight comes from its 3/8-inch Gig-Ready Series Plywood construction. The steel ball corners add to the mass. You should consider this weight when planning your load-in and load-out process for gigs.
What are the exact dimensions of this DJ coffin case?
The dimensions are 56 inches in length, 20 inches in height, and 8 inches in depth. The elongated shape is necessary to hold two turntables and a mixer side-by-side. You need this specific footprint to ensure your gear fits without overcrowding.
Is this case suitable for professional touring?
Yes, the 51-pound weight and rigid plywood build suggest it is built for professional use. The steel ball corners provide extra protection during transit. While heavy, the sturdy construction offers reliable protection for your equipment on the road.
What type of foam is included in the case?
The listing includes adjustable foam inserts. These inserts are designed to create a snug fit for your specific turntables and mixer. You can customize the layout to ensure your gear does not move during transport. This helps prevent damage to your equipment.
Can I use this case for just one turntable?
You can, but it may be inefficient. The case is sized for two turntables and a mixer. Using it for a single unit leaves significant empty space. You might need to fill the void with padding to keep your gear secure during travel.
What model number is this ProX flight case?
The model number is XS-TMC1012WLTFSTND. This identifier helps you find the correct accessories or replacement parts. It also distinguishes this coffin-style case from other ProX products. You should reference this number when checking compatibility with your specific DJ gear.