Odyssey 10-Inch Battle Position DJ Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This odyssey cbm10e carpeted dj coffin review focuses on a transport case designed for battle setups. It measures 57 by 7.5 by 21.5 inches and weighs 42 pounds. The interior layout specifically houses two turntables in a battle position. A dedicated space accommodates a ten-inch mixing board. The unit features fully foamed turntable wells for equipment protection. It also includes a removable lid for easy access. This black case provides a compact footprint for mobile DJs who need reliable gear storage during transport.
What stands out
- Dedicated space for a ten-inch mixing board
- Fully foamed turntable wells for protection
- Compact 7.5-inch height for easy storage
- Houses two turntables in battle position
- Includes a removable lid for quick access
Who it fits
Good fit for
This case suits mobile DJs who perform in battle mode and need to transport two turntables and a 10-inch mixer. The low 7.5-inch profile fits well in small vehicles or tight storage spaces. The 42-pound weight is manageable for single-person carrying. If you require a standardized battle setup with secure foam padding, this model offers a practical solution. It is ideal for those who prioritize equipment safety and compact dimensions over high storage capacity.
Who should skip it
You should look elsewhere if you need to carry a laptop, as this case lacks a dedicated compartment for one. It is also unsuitable for setups requiring a larger mixer than ten inches. If you prefer a hard-shell exterior without carpet, this carpeted finish may not match your aesthetic. Additionally, users needing a taller case for rack equipment will find the 7.5-inch height too low. This option does not support large format gear or extensive accessory storage.
Verdict: The Odyssey CBM10E is a specialized case for mobile DJs using a two-turntable battle setup. It offers secure storage for a 10-inch mixer and turntables in a compact, low-profile design.
Key specs explained for this coffin
Size: 57 x 7.5 x 21.5 inches
This case offers a long, low profile that fits two turntables and a mixer side by side. The 57-inch length provides ample room for standard gear, while the 7.5-inch height keeps the setup low to the ground. This footprint suits DJs who need a stable, compact surface for battle performances without taking up excessive stage space.
Weight: 42 lbs
At 42 pounds, this unit is heavy enough to remain stable during energetic scratching sessions but light enough for one person to carry. You will need to account for this weight when planning transport. It provides a solid base that resists sliding, which is crucial for maintaining control over your turntables during intense mixing routines.
Deck Style: Battle
The interior is configured specifically for a battle position, meaning two turntables are placed facing each other with the mixer in the center. This layout is standard for DJ battles, allowing quick access to both decks. If you perform in competitive settings or prefer this classic arrangement, this case is designed to hold your gear securely in this specific orientation.
Woofer Size: 10-Inch
The case includes a dedicated compartment sized for a ten-inch mixing board. This ensures that your mixer fits snugly without shifting during transport. When selecting a case, verify that your mixer width does not exceed ten inches. This specific dimension guarantees a proper fit for many standard DJ mixers used in portable battle setups.
Design and Build Specs
The Odyssey CBM10E is built as a transport case for battle setups. According to the listing, it features a carpeted exterior in black. This finish helps hide scuffs and scratches during travel. The case includes a removable lid, which allows you to access your gear without moving the entire unit. The interior is fully foamed. This foam lining protects your turntables and mixer from impacts while they are in transit.
The dimensions are 57 by 7.5 by 21.5 inches. This long, low profile is designed to house two turntables in a battle position alongside a ten-inch mixer. The 7.5-inch height keeps the center of gravity low, which adds stability when you are performing. The total weight is 42 pounds. This mass helps keep the case steady on stage, but it also means you will need to carry it with care. The specific deck style is listed as Battle, confirming the layout is optimized for that format.
Odyssey offers this model in various heights and sizes. The CBM10E variant is the one that fits your ten-inch mixer and two turntables. The case is designed to be sturdy and functional. It prioritizes protection and organization over aesthetics. You get a dedicated space for each piece of gear, ensuring nothing shifts during transport. The build focuses on durability for mobile DJs who move their equipment frequently.
Setup And Everyday Use
Setting up this case begins with unpacking the removable lid. You then place two turntables into the fully foamed wells. The foam is designed to hold the decks securely in a battle position. This layout keeps the platters facing each other, which is standard for scratch DJs. Next, you place your ten-inch mixing board in the dedicated space. The listing confirms the interior is sized to accommodate a board of this width. The 21.5-inch width of the case allows for a compact side-by-side arrangement. You do not need to rearrange gear for different configurations, as the wells are fixed. The 57-inch length provides enough room for standard-sized equipment without overcrowding. For everyday use, the carpeted exterior helps protect the case from minor abrasions. The black color hides dust and scuffs that occur during transport. At 42 pounds, the case is substantial. You will need to lift it carefully when loading it into a vehicle. The low 7.5-inch profile means it sits close to the ground. This can make it easier to slide under tables or into tight spaces. However, the height may require you to adjust your standing position if you prefer a higher mixing surface. The one-year warranty covers manufacturing defects. It does not cover damage from drops or improper handling. You should ensure your turntables and mixer fit within the specified dimensions before relying on this case for daily gigs. The foam wells are not adjustable, so gear must match the intended form factor.
Before You Buy This Case
You need to verify that your mixer fits the dedicated ten-inch slot. The listing specifies space for a ten-inch mixing board, but exact dimensions vary by model. Check your mixer’s width before purchasing. You also must confirm your turntables fit the fully foamed wells. These wells are shaped for a specific battle position layout. If your decks are wider or have different footprints, they may not sit securely. The case weighs 42 pounds. You should consider how you will transport it to gigs. The carpeted exterior helps hide scuffs, but you still need to clean it regularly. Dust and debris can accumulate in the foam. Keep the removable lid in good condition to protect your gear during transit. This case is one of 1 options reviewed here. It suits DJs who prioritize a dedicated battle setup over all-in-one controllers. Compare its dimensions with other cases in this guide to ensure it meets your storage needs.
Check before you buy
- Verify your mixer fits the ten-inch slot
- Check turntable width against foamed wells
- Confirm battle position layout suits your decks
- Plan transport for the 42-pound weight
The product at a glance
Odyssey 10-Inch Battle Position DJ Coffin
Best for: Mobile DJs with two turntables and a mixer
- Deck Style
- Battle
- Woofer Size
- 10-Inch
- Dimensions
- 57 × 21.5 × 7.5 inches
View on Amazon: Odyssey 10-Inch Battle Position DJ Coffin Affiliate link
The Odyssey CBM10E is a carpeted transport case designed for a 10-inch mixer and two turntables in battle position. It measures 57 by 7.5 by 21.5 inches and weighs 42 pounds. The interior features fully foamed turntable wells to secure your gear. It includes a removable lid for easy access. This case suits mobile DJs who need durable protection for their turntables and mixer during transport.
Pros
- Houses two turntables in battle position
- Fully foamed turntable wells for protection
- Fits a 10-inch mixing board
- Removable lid for access
Cons
- Heavier build at 42 pounds
- Lower height profile at 7.5 inches
- Standard one-year warranty
Good fit if
- You need a case for two turntables and a mixer
- You prefer a carpeted exterior for grip and style
- You require fully foamed wells for gear security
Skip if
- You need to transport more than two turntables
- You require a lighter case under 42 pounds
- You need a taller case for additional gear
Verdict: Odyssey CBM10E Carpeted Battle Case is a solid option for DJs who prioritize gear security with fully foamed wells and a dedicated layout for two turntables and a mixer.
Specifications side by side
| Spec | Odyssey 10-Inch Battle Position DJ Coffin |
|---|---|
| Deck Style | Battle |
| Woofer Size | 10-Inch |
| Dimensions | 57 × 21.5 × 7.5 inches |
| Size | 57 x 7.5 x 21.5 inches |
| Color | black |
| Model | CBM10E |
Frequently asked questions
Does the Odyssey CBM10E fit two turntables and a mixer?
Yes, this case is designed for that specific configuration. The interior layout features fully foamed wells dedicated to two turntables in a battle position. It also includes a separate compartment for a mixer. This makes it ideal for mobile DJs who need to transport a complete setup securely.
What are the exact dimensions of the Odyssey CBM10E case?
The case measures 57 inches in length, 21.5 inches in width, and 7.5 inches in height. These dimensions provide a long, low profile suitable for standard gear. The specific model number is CBM10E, and it is available in a black carpeted finish.
Is the interior foam fully covering the gear?
Yes, the listing indicates the case has fully foamed wells. This design holds your turntables and mixer securely in place during transit. The foam is cut to fit the specific battle position layout, preventing movement and protecting your equipment from impact.
Can I use this case for a standard DJ setup?
This case is optimized for battle setups rather than standard configurations. It is built to house two turntables facing each other. If your setup relies on a single deck or a different arrangement, this specific layout may not accommodate your gear as effectively.
What type of exterior finish does the Odyssey CBM10E have?
The case features a carpeted exterior in black. This finish helps hide scuffs and scratches that occur during travel. The carpeted material adds a layer of durability and style to the transport case, making it suitable for frequent mobile DJ use.
How much does the Odyssey CBM10E weigh?
The case weighs 42 pounds. This weight includes the structure and the internal foam padding. You should consider this mass when planning your transport, as it adds significant heft to your gear load compared to lighter, open-frame cases.