Headliner Los Angeles Headliner Pro-Fit Rane Four Review (2026): A Spec-Based Look

What stands out

• Custom fit for Rane Four and Rane Performer controllers
• Lightweight design at only 1 pound for easy carrying
• Molded EVA exterior shell with water-resistant polyester lining
• Removable eggcrate foam under the lid for customizable padding

Who it fits

Key specs explained for this case

Size: 33 x 18.5 x 6 inches

This dimension set defines the internal volume available for your controller. You need to verify that your Rane Four or Rane Performer fits within these exact boundaries. The length accommodates the controller body, while the height allows space for knobs and faders. If you plan to store cables or small accessories inside, this space may be tight. Compare this footprint with other cases to ensure it matches your vehicle trunk or carry-on requirements.

Weight: 1 pounds

This low mass indicates a lightweight construction, likely using EVA foam and polyester. You will find it easy to lift and carry this case during travel or gig transitions. A lighter case reduces strain on your shoulders when using the included strap. Compare this weight with heavier hard-shell cases to decide if portability is your priority. It suggests the case prioritizes ease of movement over extreme ruggedness.

Model: HL12008

This specific model number identifies the exact design from Headliner Los Angeles. You should use this code when searching for replacement parts or verifying compatibility with your specific controller version. It ensures you are looking at the correct custom-fit design rather than a generic alternative. Compare this identifier with other listings to confirm you are purchasing the exact case intended for the Rane Four and Performer models.

Color: Black

This neutral finish helps hide scuffs and dirt that accumulate during transport. You will find it practical for professional environments where a discreet appearance is preferred. The color does not affect protection levels but influences how the case looks in your setup. Compare this option with other colors if you want to identify your gear quickly in a crowded venue. It is a standard choice for durable equipment protection.

Design and Build Quality

The listing describes an exterior shell made from molded EVA. This material choice suggests a rigid structure that resists impact. The interior features a water-resistant polyester lining. This layer protects your controller from moisture during transit. The foam under the lid is eggcrate style. You can remove this foam if you need more vertical space for larger gear or accessories.

According to the listing, the case weighs only one pound. This low weight makes it easy to lift and carry, even when packed with other items. The dimensions are 33 x 18.5 x 6 inches. These specific measurements ensure a custom fit for the Rane Four and Rane Performer controllers. The snug fit keeps your disc jockey equipment secure and prevents shifting during transport.

The design includes hefty zippers for reliable closure. A removable shoulder strap with metal hooks and latches allows for hands-free carrying. There is also a dedicated carrying handle for short distances. The case shields vulnerable faders, switches, and knobs. It is designed to be used on its own or in combination with a Decksaver cover. This flexibility lets you choose the level of protection you need for your specific travel routine.

Setup And Everyday Use Guide

You place your Rane Four or Rane Performer directly into the case. The listing confirms a custom fit for these specific DJ controllers. This means you do not need to add extra padding or modify the interior. The eggcrate foam under the lid is removable. You can take it out if you prefer a tighter fit or want to reduce bulk. The case measures 33 x 18.5 x 6 inches. You must ensure your controller sits flat within these boundaries. The molded EVA exterior shell provides a rigid frame. This structure helps shield vulnerable faders, switches, and knobs during transportation. The water-resistant polyester lining adds a layer of protection against moisture. You can carry the case using the integrated handle. A removable shoulder strap with metal hooks and latches is also included. This allows for hands-free transport. The case weighs 1 pounds. This lightweight design makes it easy to lift and carry around your DJ gear. You can use the case on its own or combine it with a Decksaver cover for added protection. The hefty zippers secure the lid. You should check that the zippers close smoothly before traveling. The black color offers a standard professional look. You pack your controller, secure the strap, and move. The compact travel design ensures you can take your gear on-the-go with minimal effort.

Before you buy this case

You should verify that your specific Rane Four or Rane Performer model matches the custom fit dimensions listed. The case is designed for these two controllers only. Do not assume it fits other Rane units. You will need to remove the eggcrate foam if your controller has raised components that might interfere with the lid. Keep the water-resistant polyester lining dry to maintain its protective qualities. Wipe the exterior with a damp cloth if it gets dusty. This case is a lightweight option at one pound. It lacks the rugged durability of hard-shell alternatives but offers easy transport. If you travel frequently by air, consider adding a padded sleeve inside. The molded EVA shell provides basic impact resistance. You might also want a Decksaver cover for additional protection when the case is closed. This accessory complements your controller well but does not replace it.

Check before you buy

• Confirm your Rane Four or Performer fits the 33 x 18.5 x 6 inch interior.
• Check if you need to remove the eggcrate foam for your specific controller layout.
• Verify the case is compatible with your exact DJ controller model before purchasing.
• Ensure you have a carrying strap or handle for easy transport during events.

The product at a glance

1

Headliner Pro-Fit Rane Four Case

Best for: portable protection for Rane Four

Included Accessories

Case

Dimensions

33 × 18.5 × 6 inches

Weight

1 pounds

View on Amazon: Headliner Pro-Fit Rane Four Case Affiliate link

This is a custom-fit travel case for the Rane Four and Rane Performer controllers. It measures 33 by 18.5 by 6 inches and weighs just 1 pound. The design includes a molded EVA shell and water-resistant polyester lining. Eggcrate foam under the lid is removable. It features a shoulder strap with metal hooks and a carrying handle for transport.

Pros

• Custom fit for Rane Four and Performer
• Lightweight at 1 pound
• Removable eggcrate foam under the lid
• Water-resistant polyester lining

Cons

• Only protects the controller, not mixers
• No wheels for heavy hauling
• Shoulder strap uses metal hooks

Good fit if

• You carry your Rane Four frequently
• You need a lightweight protective shell
• You want a custom fit for your gear

Skip if

• You use a different controller model
• You require a hard-shell suitcase style
• You need built-in wheels

Verdict: Headliner Pro-Fit Rane Four Case is a light, custom-fit option for DJs who prioritize portability and specific protection for their Rane Four or Performer.

Specifications side by side

Frequently asked questions

See also

• headliner los angeles headliner pro fit rane four alternatives
• headliner los angeles headliner rane four flight vs headliner ddj rev5
• beats fit pro review
• beats fit pro review